WestminsterResearch

Rectangular waveguide resonators in planar form for filter applications

Shelkovnikov, Alexander B. and Budimir, Djuradj (2004) Rectangular waveguide resonators in planar form for filter applications. In: IEEE Antennas and Propagation Society International Symposium, 2004. IEEE, Los Alamitos, USA, pp. 2167-2170. ISBN 0780383028

[img]
Preview
PDF
164Kb

Official URL: http://dx.doi.org/10.1109/APS.2004.1330640

Abstract

The paper observes microwave waveguide resonators in planar form and proposes a design for obtaining low-cost devices in planar form that are suitable for mass fabrication. Periodic resonators at 3.6 GHz are designed and simulated using this technique, which represents the advantages of this technology, resulting in the reduced size, cost and compactness of these components, while maintaining an easy fabrication process. This is achieved due to the configuration that holds both the microstrip and the rectangular waveguide interconnected by a simple taper on the same substrate.

Item Type:Book Section
Uncontrolled Keywords:Microstrip lines, microstrip transitions, rectangular waveguides, resonators, waveguide couplers, waveguide filters, 3.6 GHz, filter applications, mass fabrication microwave waveguide resonators, periodic resonators, planar form, rectangular waveguide resonators, simple taper interconnection
Research Community:University of Westminster > Electronics and Computer Science, School of
ID Code:3249
Deposited On:14 Feb 2007
Last Modified:11 Aug 2010 15:31

Repository Staff Only: item control page